SGIAN DUBHS, SGIAN BREWS, DIRKS & DAMASCUS STEEL

We offer traditional, compliant length Sgian Dubhs in Stainless and Hi Carbon Damascus Steel, both as bare blades or with "kit" items such as handle blanks in selected hardwoods, plain and Celtic pattern embossed leather scabbards - and - (arriving soon) high quality, attractive cardboard presentation cases.
Stag antler handles are also available, with crown ( strictly limited availability )or plain rolls ( good availability).
Bulk and trade orders are easily catered for - please enquire individually with us if this type of volume is required.

Hi Carbon Damascus bar - 1/8"

Hi Carbon Damascus bar - 1/8"

Nominal lengths to 40" available.

1.5" width, 1/8" thickness

Hi carbon tool steel 01 & 1095 mix giving good tight Bird's Eye pattern.

Illustration shows surface of ground and acid treated bar before hardening.

Material will require basic hardening and tempering ahead of use.

Priced per inch

Price: £2.95 each
 

Hi Carbon Damascus bar - 1/4"

Hi Carbon Damascus bar - 1/4"

Nominal lengths to 40" available.

1.5" width, 1/4" thickness

Hi carbon tool steel 01 & 1095 mix giving good tight Bird's Eye pattern.

Illustration shows surface of ground and acid treated bar before hardening.

Material will require basic hardening and tempering ahead of use.

Priced per inch

Price: £3.25 each
 

TRADITIONAL 12

TRADITIONAL 12

Full, traditional 12" Scottish Dirk.

Full blood groove and jimps with stick tang.

We stock these to "the trade" in either Hi carbon Damascus (Bird's Eye pattern) or stainless format.

Complimentary leather scabbard with all blades sold.

Retail rates given below - please enquire with us if your interest is for trade volumes.

Damascus Dirk c/w scabbard: £44.95 each
 
Stainless Dirk**NO STOCK**: £0.00 each
 

SGIAN DUBH, TRADITIONAL 3.5

SGIAN DUBH, TRADITIONAL 3.5

Compliant 3.5" blades.
Traditional pattern with full blood groove and jimps.
Highly polished steel. Two widths - 23mm and 25mm, measured across top of blade.
Stick tang may be fitted easily to choice of handle in traditional manner of assembly with appropriate ( epoxy ) adhesive.
Trade terms available where appropriate - MOQ's will apply ( enquire please )

SGIAN DUBH 25mm : £4.95 each
 
SGIAN DUBH 23mm : £4.95 each
 

SGIAN BREW ( DAMASCUS STEEL)

SGIAN BREW ( DAMASCUS STEEL)


Increasingly sought after "Sgian Brew" in tight, Hi Nickel ladder type pattern damascus steel. 80mm "blade" ( blunt to suit the bottle tops!!! ) and 45mm tang.
Have not been hardened but perfectly adequate as they are. Take a nice "blued" hardening ( easily done - ask us for advice ) if so desired.
Also in plain polished steel ( not shown )

Damascus Sgian Brew: £16.95 each
 
Plain Sgian Brew: £4.95 each
 

Damascus Sgian Dubh

Damascus Sgian Dubh

OUT OF STOCK UNTIL NOVEMBER

SGAIN DUBH DAMASCUS 25mm NO STOCK: £0.00 each
 

SGIAN DUBH SHEATHS

SGIAN DUBH SHEATHS



Carefully hand stitched full grain leather sheaths. Choose from Plain or Trinity Knot ( Celtic Knot ) embossed. We've found that whilst these are well finished, all scabbards may be greatly enhanced with a little careful polishing ( just like shoes!!!)

Sgian Scabbard Knot: £2.95 each
 
Sgian Scabbard Plain: £2.95 each
 
Sgain Scabbard Knot (5): £12.50 each
 
Sgian Scabbard Plain (5): £12.50 each
 

PRESENTATION CASE - SGIAN DUBH

PRESENTATION CASE - SGIAN DUBH





Substantial, hand assembled cardboard cases covered in either Red, Green or Black textured paper. Polyester wool insert - use to prop up item for display or assist in protecting for shipping.

Cases are lidded (fully detatchable)and approx 200L x 50W x 25D

Enquire with us for trade discounts ( 25 pieces or more )


Sgian case - Black: £1.25 each
 
Sgian case - Green: £1.25 each
 
Sgian case - Red: £1.25 each
 
Sgian case - Black (5) : £5.00 each
 
Sgian case - Green (5) : £5.00 each
 
Sgian case - Red (5): £5.00 each
 
Sgian case - mix cols (5): £5.00 each
 

Ordering - How it Works

1. Browse the categories, adding the items that interest you to the cart. 

2. Submit the order to us with your full contact details. 

3. We assess the order and  calculate the most cost effective carriage option.

4. Finally, we contact you, advise the preferred carriage option and request payment.

 

Highland Horn Company Ltd, Taigh na Corrach, Knockmuir Brae, Avoch, Ross-Shire, Scotland IV9 8RD

Tel: +44 (0)1381 622488 Fax: 0845 280 2225 Email:

Copyright Highland Horn Company Ltd. © 2017   |   Terms & Conditions   |   Website by plexus media