|
Carefully dimensioned regular slabs of Water Buffalo horn for general stock and stock extension work, select pieces of buffalo horn for fore end caps. Knifemakers scales in Buffalo horn, buffalo and Camel bone.
| DAMASCUS STEEL BAR |
|---|
| VARIOUS LENGTHS AVAILABLE TO 36" MAX. IN TWO THICKNESSES, 1/4" & 1/8". BOTH 1.5" IN WIDTH.
GOOD, TIGHT HI-CARBON BIRD'S EYE PATTERN. DETAILS IN DAMASCUS SECTION
UNHARDENED
|
| BONE SECTIONS |
|---|
 | PEROXIDED BUFFALO LEG BONE "HOLLOWS".
6" - 10" IN LENGTH, VARYING CROSS SECTIONAL PROFILES. CUT DOWN FOR INSERTS. OCASSIONALLY EVEN ( ROUND ) ENOUGH FOR TURNERY.
Price: £1.75 each
|
| BUFFALO HORN SCALES 6 |
|---|
 | INTENDED AS GUNSTOCK PIECES, WHETHER REQUIRED FOR STOCK EXTENSION OR BUTT PLATE WORK.
DECENT BULK RATES ON 1/2" MATERIAL.
THREE THICKNESSES
1"
3/4"
1/2"
OTHER SIZES BY REQUEST AND FROM PREVAILING STOCK.
|
| CAMEL BONE ( SAMBAR STAG LOOKALIKE ) |
|---|
 | EXCELLENT MATURE SAMBAR STAG SCALE LOOKALIKE MATERIAL IN COLOUR AND TEXTURE. VERY CAREFULLY AND EFFECTIVELY "JIGGED". FIRST CLASS POTASH STAINING OF ALL PIECES HAS PRODUCED MATERIAL ALMOST INDISTINGUISHABLE FROM TRUE SAMBAR STAG.
TWO SIZES AVAILABLE. DYED FINISH ONLY.
| 125 x 37 x 6mm ( PAIR ) : £6.25 each | |
| 112 x 32 x 6mm ( PAIR ) : £5.75 each | |
|
| CAMEL BONE SCALES ( SPRINGBOK HORN LOOKALIKE ) |
|---|
 | CAMEL BONE SCALES JIGGED TO MIMICK THE UNIQUE AND ATTRACTIVE SURFACE TEXTURE OF SPRINGBOK HORN, MUCH FAVOURED IN KNIFEMAKING.
NATURAL PIECE ILLUSTRATED, DYED PIECES ALSO STOCKED.
DYE USED IS DARK BROWN, SIMILAR IN APPEARANCE TO DYED SAMBAR STAG (ACHIEVED BY IMMERSION IN POTASH . MAY BE SELECTIVELY POLISHED OUT TO ATTAIN DESIRED APPEARANCE).
PER PAIR
| 125 x 37 x 6mm NATURAL: £4.50 each | |
| 112 x 32 x 6mm NATURAL: £4.00 each | |
| 125 x 37 x 6mm DYED: £4.50 each | |
| 112 x 32 x 6mm DYED: £4.00 each | |
|
| CAMEL BONE SCALES PLAIN |
|---|
| ONE FLAT SIDE, ONE DOMED SIDE. FINE SANDED, PEROXIDED FINISH.
FROM DOMESTICATED INDIAN CAMEL.
USEFUL LONGER LENGTHS. FAVOURED AS INLAY MATERIAL.
LENGTH x WIDTH x THICKNESS.
37mm ( INCH AND HALF WIDTH ) MATERIAL IDEAL FOR KNIFEWORK. TAKES A FINE SURFACE POLISH. IDEAL FOR SCRIMSHAWING.STATED THICKNESSES ARE TYPICAL MINIMUM VALUES, OFTEN MUCH THICKER.
| 200 x 25 x 6mm ( PAIR ) : £5.75 each | |
| 150 x 25 x 6mm ( PAIR ) : £4.75 each | |
| 125 x 37 x 6 - 8mm ( PAIR ): £6.50 each | |
|
|
 )
 )